| Or, try swapping the two 512 chips on the same riser. Run the test again. If the failure is the same, try swapping the 1GB chips, then run the test again.
Also, a memory error will sometimes show up in your System Profiler, under the memory tab, or the Diagnostics tab might also show a memory error, listing the (sometimes cryptic) memory location.
You can also try swapping one pair into the other riser, then run the test again.
Or, removing one pair completely, then check the test again, then remove that pair, and test again with just the other pair installed.
Be prepared to accept that reseating the memory may fix the error. It might not ever recur, or could be just a temporary fix. The memtest utility can be helpful, too.
__________________
Serendipity is a lucky guess !
|