Ok, I worked on this for hours and hours and hours!! I have a Linksys WPS54g, connected to it a PC desktop, many laptop pc's and FINALLY a macbook with OS Leopard. I tried everything here and could connect to the print server,but couldn't print. I found my solution somewhere along the way. Anyway, to those frustrated try this:
Go to this site and download the Ghostscript first, then the Foomatic, and then the hpijs file. Install all that from here:
http://www.linuxfoundation.org/en/Op...g/MacOSX/hpijs
Then update the firmware on your wireless print server from the manufacturer, Linksys is:
http://www.linksysbycisco.com/US/en/...PS54G/download
after the install unplug the print server and restart computers. All should be great!!
Just to be clear the mac settings are:
stated by others previously, one of my problems was the last step in the location bar. I kept putting my actual server's name, but in fact you use the default name for the server not the name you give it. enter it in location as:
IP_LK652D7BP1
this is located on the status page of the print server page under default name, by the way this is the same page that you use to update the river you download from the manufacturer.
Feel free to email me if you need assistance and I will try my best to assist you!