|
#1
January 13th, 2008, 07:29 AM
| |||
| |||
 new user can not ssh into box I created a new user and they are unable to ssh into the mac (running Leopard). I can log into the box from the GUI, but not via ssh. Is there some tool that has to run to sync the keychain with PAM? If so, how does this run and when does this run?  |
|
#3
January 17th, 2008, 01:44 PM
| |||
| |||
| You say that *you* can remotely log into the machine with your account. Are you SSH'ing *from* the same machine *to* the same machine? That wouldn't really prove much other than that SSH is at least enabled. Does the person that you made this new account for receive any error/warning messages when he/she tries to SSH into the machine, or does it just timeout eventually? Where is he/she physically with respect to the machine? I assume not in the same room? He/she could also use ssh -v or ssh -vv for verbosity and even MORE verbosity (respectively). Finally, is the address of the machine–the one everyone's yearning to log into–routable? If it is in the range of addresses below, then it's probably not able to be logged into *unless* they're two machines within the same network: 10.0.0.0 to 10.255.255.255 172.16.0.0 to 172.31.255.255 192.168.0.0 to 192.168.255.255 169.254.0.0 to 169.254.255.255 Last edited by cupojava; January 17th, 2008 at 01:52 PM. |
|
#4
January 17th, 2008, 10:16 PM
| |||
| |||
| The machine is on my home lan, but my router forwards a port to the ssh port on the machine so I can log into it when I'm at work, for example. What happens is that she is simply asked for her password over and over until the number of tries exceeds the password retry limit (currently set to 6) as though the password is mistyped or no password is entered. I have tried to ssh in using her user from the box itself (which does indeed go through the sshd protocol handshake), and from another machine on my lan with the same result. It just appears as though the password does not match. I created yet another user and tried it with this user and got the same problem. I don't know what the difference is between what I did with the first user created and the second or third, other than the first user created was during the setup. This is why i suspect there's some missing interaction between keychain and PAM. |
|
#6
January 18th, 2008, 09:33 PM
| |||
| |||
| Well, it doesn't give me any clues: paladin:~ tamara$ ssh -v -v -v katarin@miishka OpenSSH_4.5p1, OpenSSL 0.9.7l 28 Sep 2006 debug1: Reading configuration data /etc/ssh_config debug2: ssh_connect: needpriv 0 debug1: Connecting to miishka [192.168.1.5] port 22. debug1: Connection established. debug1: identity file /Users/tamara/.ssh/identity type -1 debug3: Not a RSA1 key file /Users/tamara/.ssh/id_rsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /Users/tamara/.ssh/id_rsa type 1 debug1: identity file /Users/tamara/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_4.5 debug1: match: OpenSSH_4.5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_4.5 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,zlib@openssh.com debug2: kex_parse_kexinit: none,zlib@openssh.com debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_init: found hmac-md5 debug1: kex: server->client aes128-cbc hmac-md5 none debug2: mac_init: found hmac-md5 debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 120/256 debug2: bits set: 516/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: filename /Users/tamara/.ssh/known_hosts debug3: check_host_in_hostfile: match line 9 debug3: check_host_in_hostfile: filename /Users/tamara/.ssh/known_hosts debug3: check_host_in_hostfile: match line 3 debug1: Host 'miishka' is known and matches the RSA host key. debug1: Found key in /Users/tamara/.ssh/known_hosts:9 debug2: bits set: 498/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /Users/tamara/.ssh/identity (0x0) debug2: key: /Users/tamara/.ssh/id_rsa (0x1081c0) debug2: key: /Users/tamara/.ssh/id_dsa (0x0) debug1: Authentications that can continue: publickey,password,keyboard-interactive debug3: start over, passed a different list publickey,password,keyboard-interactive debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /Users/tamara/.ssh/identity debug3: no such identity: /Users/tamara/.ssh/identity debug1: Offering public key: /Users/tamara/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Trying private key: /Users/tamara/.ssh/id_dsa debug3: no such identity: /Users/tamara/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup keyboard-interactive debug3: remaining preferred: password debug3: authmethod_is_enabled keyboard-interactive debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 Password: debug3: packet_send2: adding 32 (len 20 padlen 12 extra_pad 64) debug1: Authentications that can continue: publickey,password,keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 Password: debug3: packet_send2: adding 32 (len 20 padlen 12 extra_pad 64) debug1: Authentications that can continue: publickey,password,keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 Password: |
|
#7
January 18th, 2008, 09:37 PM
| |||
| |||
| As a comparison, here's what I get when I log in as me: paladin:~ tamara$ ssh -v -v -v tamara@miishka OpenSSH_4.5p1, OpenSSL 0.9.7l 28 Sep 2006 debug1: Reading configuration data /etc/ssh_config debug2: ssh_connect: needpriv 0 debug1: Connecting to miishka [192.168.1.5] port 22. debug1: Connection established. debug1: identity file /Users/tamara/.ssh/identity type -1 debug3: Not a RSA1 key file /Users/tamara/.ssh/id_rsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /Users/tamara/.ssh/id_rsa type 1 debug1: identity file /Users/tamara/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_4.5 debug1: match: OpenSSH_4.5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_4.5 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,zlib@openssh.com debug2: kex_parse_kexinit: none,zlib@openssh.com debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_init: found hmac-md5 debug1: kex: server->client aes128-cbc hmac-md5 none debug2: mac_init: found hmac-md5 debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 114/256 debug2: bits set: 517/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: filename /Users/tamara/.ssh/known_hosts debug3: check_host_in_hostfile: match line 9 debug3: check_host_in_hostfile: filename /Users/tamara/.ssh/known_hosts debug3: check_host_in_hostfile: match line 3 debug1: Host 'miishka' is known and matches the RSA host key. debug1: Found key in /Users/tamara/.ssh/known_hosts:9 debug2: bits set: 504/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /Users/tamara/.ssh/identity (0x0) debug2: key: /Users/tamara/.ssh/id_rsa (0x1081c0) debug2: key: /Users/tamara/.ssh/id_dsa (0x0) debug1: Authentications that can continue: publickey,password,keyboard-interactive debug3: start over, passed a different list publickey,password,keyboard-interactive debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /Users/tamara/.ssh/identity debug3: no such identity: /Users/tamara/.ssh/identity debug1: Offering public key: /Users/tamara/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Trying private key: /Users/tamara/.ssh/id_dsa debug3: no such identity: /Users/tamara/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup keyboard-interactive debug3: remaining preferred: password debug3: authmethod_is_enabled keyboard-interactive debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 Password: debug3: packet_send2: adding 32 (len 22 padlen 10 extra_pad 64) debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 0 debug3: packet_send2: adding 48 (len 10 padlen 6 extra_pad 64) debug1: Authentication succeeded (keyboard-interactive). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 0 debug3: tty_make_modes: ospeed 9600 debug3: tty_make_modes: ispeed 9600 debug3: tty_make_modes: 1 3 debug3: tty_make_modes: 2 28 debug3: tty_make_modes: 3 127 debug3: tty_make_modes: 4 21 debug3: tty_make_modes: 5 4 debug3: tty_make_modes: 6 255 debug3: tty_make_modes: 7 255 debug3: tty_make_modes: 8 17 debug3: tty_make_modes: 9 19 debug3: tty_make_modes: 10 26 debug3: tty_make_modes: 11 25 debug3: tty_make_modes: 12 18 debug3: tty_make_modes: 13 23 debug3: tty_make_modes: 14 22 debug3: tty_make_modes: 17 20 debug3: tty_make_modes: 18 15 debug3: tty_make_modes: 30 0 debug3: tty_make_modes: 31 0 debug3: tty_make_modes: 32 0 debug3: tty_make_modes: 33 0 debug3: tty_make_modes: 34 0 debug3: tty_make_modes: 35 0 debug3: tty_make_modes: 36 1 debug3: tty_make_modes: 38 1 debug3: tty_make_modes: 39 1 debug3: tty_make_modes: 40 0 debug3: tty_make_modes: 41 1 debug3: tty_make_modes: 50 1 debug3: tty_make_modes: 51 1 debug3: tty_make_modes: 53 1 debug3: tty_make_modes: 54 1 debug3: tty_make_modes: 55 0 debug3: tty_make_modes: 56 0 debug3: tty_make_modes: 57 0 debug3: tty_make_modes: 58 0 debug3: tty_make_modes: 59 1 debug3: tty_make_modes: 60 1 debug3: tty_make_modes: 61 1 debug3: tty_make_modes: 62 1 debug3: tty_make_modes: 70 1 debug3: tty_make_modes: 72 1 debug3: tty_make_modes: 73 0 debug3: tty_make_modes: 74 0 debug3: tty_make_modes: 75 0 debug3: tty_make_modes: 90 1 debug3: tty_make_modes: 91 1 debug3: tty_make_modes: 92 0 debug3: tty_make_modes: 93 0 debug2: channel 0: request shell confirm 0 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel 0: rcvd adjust 131072 Last login: Fri Jan 18 19:34:21 2008 from paladin miishka:~ tamara$ |
|
#8
January 19th, 2008, 07:01 AM
| ||||
| ||||
| Are you using keys with no password to log in to the other SSH box? I wonder if you have to regenerate the keys for both.
__________________ • Apple iMac G5 17" (2 GHz G5) - Mac OS X 10.4.11 • Apple Macintosh Quadra 650 (33 MHz MC68040) - Mac OS 8.1 • Apple PowerBook Duo 230 (33 MHz MC68030) - System 7.1 • "JHVH-1" (2 GHz AMD Athlon XP 2400+) - Slackware 12 • "Kiddiebuntu" (2.8 GHz Celeron D 335) - Ubuntu 7.10 |
