i have an old system running system 7.6. i wanted to connect via my LAN to my eMac running osx 10.3 but could not find the eMac in the Chooser? How do i achieve this? It seems i cannot connect to my old mac which is on system 7.6 from the eMac too... Did Apple remove this "feature"?
Any...
Thanks for all the advice
The machine only became faulty a few days ago.
The RAM was installed a few months back and the firmware was updated then too successfully.
I have double checked and there are no missing screws or screws lying about inside the machine.
Looks like it is...
Hi there
i have a problem with my iMAC which i hope someone can advise me..
It is Revision A 233 MHz Bondi iMac. Recently it just will not start. When i pressed the power button, the machine shuts itself off after 2-3 seconds.
At first i thought it was the battery, so i got it replaced...
ok, sorry abt that. Yes you can activate the "share internet connection" on the mac to allow others on the same network to share a single internet connection.
The PC DHCP settings need to be set up to accept IP addresses automatically. Assuming your network card is properly installed with...
If you have a DSL modem with a USB connection, most likely you will have to use the software sharing method, or get a combination DSL modem/router.
IPNetShareX is a program designed to give users graphical access to Mac OS X's Network Address Translation (NAT) services without having to use...
How are you connected to the internet? via broadband or analog modem?
If u are connected via ethernet broadband then invest in a simple broadband router such as the ones sold on the net by netgear or linksys....
Then connect the mac and pc and the broadband modem to it and you can surf on...
If you are running OSX on your Mac you should be able to see your Mac Machine in your Network neighbourhood
If you are running Mac OS9 or earlier than you may need to install a software such as PCMaclan on your PC NoteBook
hope this helps