connecting to a router
- Thread starter kay_berry
- Start date
-
- Tags
- networking
Most routers can be used out of the box.
You can go here: Linksys Support
Type in your model number and you should be able to find the instructions on how to get to the web based set up
You can go here: Linksys Support
Type in your model number and you should be able to find the instructions on how to get to the web based set up
co19
Registered
If you want to configure your router, follow these steps:
1. Make sure you are connected to it, either hardwire or wireless
2. Open up any browser
3. In the URL bar type: 192.168.1.0 (192.168.0.1 for dlink)
4. Default for linksys routers is no username and password is admin! If you have an older one, username is home and password is admin.
5. Look around and use the setup wizards if you are new to this.
1. Make sure you are connected to it, either hardwire or wireless
2. Open up any browser
3. In the URL bar type: 192.168.1.0 (192.168.0.1 for dlink)
4. Default for linksys routers is no username and password is admin! If you have an older one, username is home and password is admin.
5. Look around and use the setup wizards if you are new to this.
Last edited: