I cannot seem to shutdown or restart from the apple menu. Every time i try, Finder will quit, but i am left with a blue screen and the mouse pointer. Holding Command+Option+Esc shows that nothing is running, so cannot relaunch Finder.
Console reports the following on attempted shutdown...
Sep 21 00:23:00 Macintosh-2 loginwindow[39]: ERROR | -[ApplicationManager(AppleEventHandling) _tryQuitAllForRequestor:replyEvent:] | _tryQuitAllForRequestor - _vproc_set_global_on_demand returned error -1848883252
Now, i thought i had found a solution to the problem, but it's is annoying having to follow it every time. If i close my iBook and re-open (ie sleep and then wake), i am then more often then not able to shut down without issue.
Any ideas?
Many thanks
Rich
UPDATE I've just tried the sleep and wake technique until it wouldn't shoutdown/restart. It took two tries, not a very good technique!!
Console reports this after the failed shutdown...
Sep 21 23:06:45 Macintosh-2 kernel[0]: System Sleep
Sep 21 23:06:48 Macintosh-2 kernel[0]: System Wake
Sep 21 23:06:48 Macintosh-2 kernel[0]: Wake event 0008
Sep 21 23:06:48 Macintosh-2 kernel[0]: pci restore waited for ethernet (24388) fail
Sep 21 23:06:48 Macintosh-2 kernel[0]: ADB present:84
Sep 21 23:06:52 Macintosh-2 kernel[0]: AirPort: Link Up on en2
Sep 21 23:06:52 Macintosh-2 kernel[0]: SetCryptoKey T: len 32, idx 0
Sep 21 23:06:52 Macintosh-2 kernel[0]: SetCryptoKey R: len 32, idx 2
Sep 21 23:06:53 Macintosh-2 [0x0-0xd00d].com.apple.finder[103]: DivX Codec: Opening component for type : DX50
Sep 21 23:06:53 Macintosh-2 [0x0-0xd00d].com.apple.finder[103]: DivX Codec: Use speedy y420 component 0x1058
Sep 21 23:06:53 Macintosh-2 [0x0-0xd00d].com.apple.finder[103]: DivX Codec: Altivec Acceleration enabled!
Sep 21 23:06:53 Macintosh-2 [0x0-0xd00d].com.apple.finder[103]: DivX Codec: Opening component for type : DX50
Sep 21 23:06:53 Macintosh-2 [0x0-0xd00d].com.apple.finder[103]: DivX Codec: Use speedy y420 component 0x1058
Sep 21 23:06:53 Macintosh-2 [0x0-0xd00d].com.apple.finder[103]: DivX Codec: Altivec Acceleration enabled!
Sep 21 23:06:53 Macintosh-2 [0x0-0xd00d].com.apple.finder[103]: DivX Codec: Opening component for type : DX50
Sep 21 23:06:53 Macintosh-2 [0x0-0xd00d].com.apple.finder[103]: DivX Codec: Use speedy y420 component 0x1058
Sep 21 23:06:53 Macintosh-2 [0x0-0xd00d].com.apple.finder[103]: DivX Codec: Altivec Acceleration enabled!
Sep 21 23:06:53 Macintosh-2 com.apple.launchd[84] ([0x0-0xd00d].com.apple.finder[103]): Stray process with PGID equal to this dead job: PID 515 PPID 1 nmblookup
Sep 21 23:06:53 Macintosh-2 mDNSResponder[16]: NOTE: Wide-Area Service Discovery disabled to avoid crashing defective DNS relay 192.168.1.1:53
At this point i powered off by holding the power button down.
I'm still stumped!
Console reports the following on attempted shutdown...
Sep 21 00:23:00 Macintosh-2 loginwindow[39]: ERROR | -[ApplicationManager(AppleEventHandling) _tryQuitAllForRequestor:replyEvent:] | _tryQuitAllForRequestor - _vproc_set_global_on_demand returned error -1848883252
Now, i thought i had found a solution to the problem, but it's is annoying having to follow it every time. If i close my iBook and re-open (ie sleep and then wake), i am then more often then not able to shut down without issue.
Any ideas?
Many thanks
Rich
UPDATE I've just tried the sleep and wake technique until it wouldn't shoutdown/restart. It took two tries, not a very good technique!!
Console reports this after the failed shutdown...
Sep 21 23:06:45 Macintosh-2 kernel[0]: System Sleep
Sep 21 23:06:48 Macintosh-2 kernel[0]: System Wake
Sep 21 23:06:48 Macintosh-2 kernel[0]: Wake event 0008
Sep 21 23:06:48 Macintosh-2 kernel[0]: pci restore waited for ethernet (24388) fail
Sep 21 23:06:48 Macintosh-2 kernel[0]: ADB present:84
Sep 21 23:06:52 Macintosh-2 kernel[0]: AirPort: Link Up on en2
Sep 21 23:06:52 Macintosh-2 kernel[0]: SetCryptoKey T: len 32, idx 0
Sep 21 23:06:52 Macintosh-2 kernel[0]: SetCryptoKey R: len 32, idx 2
Sep 21 23:06:53 Macintosh-2 [0x0-0xd00d].com.apple.finder[103]: DivX Codec: Opening component for type : DX50
Sep 21 23:06:53 Macintosh-2 [0x0-0xd00d].com.apple.finder[103]: DivX Codec: Use speedy y420 component 0x1058
Sep 21 23:06:53 Macintosh-2 [0x0-0xd00d].com.apple.finder[103]: DivX Codec: Altivec Acceleration enabled!
Sep 21 23:06:53 Macintosh-2 [0x0-0xd00d].com.apple.finder[103]: DivX Codec: Opening component for type : DX50
Sep 21 23:06:53 Macintosh-2 [0x0-0xd00d].com.apple.finder[103]: DivX Codec: Use speedy y420 component 0x1058
Sep 21 23:06:53 Macintosh-2 [0x0-0xd00d].com.apple.finder[103]: DivX Codec: Altivec Acceleration enabled!
Sep 21 23:06:53 Macintosh-2 [0x0-0xd00d].com.apple.finder[103]: DivX Codec: Opening component for type : DX50
Sep 21 23:06:53 Macintosh-2 [0x0-0xd00d].com.apple.finder[103]: DivX Codec: Use speedy y420 component 0x1058
Sep 21 23:06:53 Macintosh-2 [0x0-0xd00d].com.apple.finder[103]: DivX Codec: Altivec Acceleration enabled!
Sep 21 23:06:53 Macintosh-2 com.apple.launchd[84] ([0x0-0xd00d].com.apple.finder[103]): Stray process with PGID equal to this dead job: PID 515 PPID 1 nmblookup
Sep 21 23:06:53 Macintosh-2 mDNSResponder[16]: NOTE: Wide-Area Service Discovery disabled to avoid crashing defective DNS relay 192.168.1.1:53
At this point i powered off by holding the power button down.
I'm still stumped!