Booting Intel OSX Tiger from USB drive

tomax7

Registered
Just to keep this saga of my wife's failed intel imac OSX failed HD.

Came up with an idea of using my USB 200BG backup drive to recover the original drive.

Boot system up with CD in drive. Hold "C" key after the 'tada' sound till you see the spinning wheel comes on. That will enable you to boot up with the DVD drive.

(Of course the system isn't set to boot off DVD drive in case you get a brain fart thinking that route...)

Install, after the language screen, go to Disk Utilities and pick the DVD drive. Click on OPTIONS button near the bottom right.

Select format using GUDI, not APM.

Click OK

Then partition the drive.

Then exit Disk Utility and you should see an Orange Circle around the drive and install OSX Tiger to it.

From reading other blogs, this can only be done on Intel systems, not sure if just duo or solo, but my wife's is a duo.

Once Tiger is installed, buy Disk Warrior and recover the information from the original HD inside the unit.

Found this over at: http://www.macobserver.com/tip/2006/08/16.1.shtml
 
Back
Top