Connecting DV Camcorder locks OSX

D

delgaudm

Registered
*Sorry for the crosspost in hardware forum -- thought this might be the more appropriate forum*:rolleyes:

Man am I stuck. I just brought home my very first mac this week to hook up to my new Sony camcorder (DCR-PC9). I hook the firewire from the camera to the mac, and as soon as the camera powers up, the mac locks. Only the mouse moves, nothing responds. the iMovie software reports "Camera Disconnected." I'm using a 4 to 6 pin firewire cable.

Oddly, as soon as I power the camera down, the mac comes back to life, and all the buttons I clicked during the lock-up are performed. It's as if the mouse clicks are bufferred somewhere.

I've hooked the camera to a friends Sony VAIO WinXP using a 4pin to 4pin Firewire cable, and it worked fine. Yikes.

Is there anyway to diagnose this, short of buying a new 4 to 6pin cable and praying?

I spent 90 minutes on the phone with Apple support, but no joy. They gave up. Problem is I have exactly 4 hours experience with a mac, and have no idea what to do next.

Thanks!!!!
 
I never had a problem with the Sony TRV or something...anyway,

I used Final Cut Pro to capture in both OS X and 9. What is your system, and do you have all the drivers installed? I'm not sure if this has anything to do with it, but once a bad DV driver found its way into my system folder(OS 9). I only realized this after comparing a backup of my extensions and noticed that file was not there and is not the Apple DV driver. After I removed that files all was well again, but I'm not sure of your system satus, so I need more info.
 
Urbansory, thanks for the reply....
I finally sucked it up and went out and got a new FireWire cable. One labeled "Apple and Sony iLink Compatible". That worked fine. The moral of the story.... Belkin cable good, Cables Unlimited cables bad.

Thanks.
 
You must log in or register to reply here.
Back
Top