DI-614+ - no DHCP on wireless side- HELP

G

GraphicUmp

Registered
The wired side is fine - distributes IP addresses to all wired computers (4).

The wireless AP appears to be fine, as it says my PB 1400c running OS 9.1 with an ORiNOCO Gold card is connected (correct MAC address and everything). My PB (ORiNOCO Client 7.2 software) says it's connected and getting a good signal.

But I get a self-assigned IP address and I can't do anything.

Any ideas? Please?
 
Does it work if you give yourself a static IP in the proper range? I'd test that first to make sure that all your WEP settings are correct in your wireless config.

Brian
 
I gave myself a static IP exactly like my dynamic IP addresses, just .111 instead of .109 (the highest dynamic IP assigned).

I don't have WEP turned on; I wanted to get everything working properly first.
 
Okay, I got the thing to work. I had to play with the default settings (RTS and Fragmentation) in order for it to receive an IP address. I lowered the numbers until it worked and all is good.

Thanks for responding so quickly, Brian.
 
Zammy-Sam said:
Also check for firmware updates. I think there was one recently, but I might be wrong.
Click to expand...

You're not wrong; there was a firmware update. I applied it early in the process. All is working quite well now...next step is to enable WEP :D
 
You must log in or register to reply here.
Back
Top