External FW Hard Drive not mounting...

S

SMVH

Registered
I have a Fantom drive with 2 partitions. Smooth sailing until today. One partition mounts on the desktop (_3 shown below) but the other (_2) does not.
System Profiler shows it there, but empty?:\ Disk Utility shows it as well, as mounted, but not the right icon, a blank page. icon WHen I "unmount" it in Disk Utility, the icon appears there. HELP! First Aid ran clean.




System Profiler:
FireWire Bus:

Maximum Speed: Up to 800 Mb/sec

S1:

Manufacturer:
Model: 0x0
GUID: 0x30E002E0070492
Maximum Speed: Up to 800 Mb/sec
Connection Speed: Up to 800 Mb/sec
Sub-units:
S1 Unit:
Unit Software Version: 0x10483
Unit Spec ID: 0x609E
Firmware Revision: 0x101
Product Revision Level:
Sub-units:
S1 SBP-LUN:
Capacity: 465.77 GB
Removable Media: Yes
BSD Name: disk1
OS9 Drivers: Yes
S.M.A.R.T. status: Not Supported
Volumes:
FineDesign_2:
Capacity: 399.88 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s10
Mount Point: /Volumes/FineDesign_2
FineDesign_3:
Capacity: 65.65 GB
Available: 62.57 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s12
Mount Point: /Volumes/FineDesign_3
 
Does it appear in terminal?'

Type "cd /volumes" and then "ls" (leave off quotations)

Does the drive appear along with the others? If so it should still be there. If not try another disk utility program such as Disk Warrior or Norton Utilities or Tech Tool. Also it is possible that the drive may be damaged or failing.
 
You must log in or register to reply here.
Back
Top