firewire for Sony Handycam ccd trv608

C

chokatella

Registered
I want to transfer from the analog camcorder to mac and have tried the USB but mac fails to recognize a connection. So although i know i need a firewire i dont know where to get one of the name of it. So if anyone happens to know or if you can tell me how mac can realize connection to camcorder. This would be really helpful..
 
Hello chokatella & welcome to MacosX :)

Not knowing the type/brand of cam you have, I can offer that it's likely you would either need:

  • 6 to 6 pin Firewire cable
  • 4 to 6 pin Firewire cable

You should be able to determine this by examining the Firewire port on your cam, it'll either be a 4 or a 6 pin connector.

Check any manual that came with the cam and you can try Googling your Cams brand name/specifications to find out info about the accessories ... the Firewire cable specs should be mentioned ....

Depending on where you live, you can pick one up fairly cheaply at either Dick Smith or Wallmart ....or similar type business :)
 
You must log in or register to reply here.
Back
Top