Hi to all!
I'm having trouble hooking up an iBook G4 800 to my TV. I have connected the iBook many times to external displays (projectors) using the supplied vga-out adapter with success every time. My friend recently brought me an Apple iBook TV-out adapter from the store in London, but when I connected the iBook to the TV it incorrectly recognizes the TV as a VGA display not as a TV. I've tried connecting it to 3 different television sets, all multi-system, to no avail. Also, I've used both the composite and S-video out signals. In Display Preferences I don't get the TV preferences pane when connected, only the VGA monitor one, meaning I can't choose what resolution and TV signal system (PAL, NTSC). There is a signal, at lower resolutions I can see the screen but again, because it isn't the correct signal it comes up as 3 different screens on the TV. I've tried updating the iBook graphics drivers and I also installed ATI Displays which doesn't do anything either. One of the TVs I've used has been used successfully to connect a PBook 15" to it so that's not a problem. I've read on various forums that a few other people have had similar problems and have had their iBooks sent in for Logic Board Repair to correct this problem. Quite frankly I'd like to avoid such a solution, if possible.
If anybody has any suggestions I'd appreciate them!
Thanks,
Ofer
I'm having trouble hooking up an iBook G4 800 to my TV. I have connected the iBook many times to external displays (projectors) using the supplied vga-out adapter with success every time. My friend recently brought me an Apple iBook TV-out adapter from the store in London, but when I connected the iBook to the TV it incorrectly recognizes the TV as a VGA display not as a TV. I've tried connecting it to 3 different television sets, all multi-system, to no avail. Also, I've used both the composite and S-video out signals. In Display Preferences I don't get the TV preferences pane when connected, only the VGA monitor one, meaning I can't choose what resolution and TV signal system (PAL, NTSC). There is a signal, at lower resolutions I can see the screen but again, because it isn't the correct signal it comes up as 3 different screens on the TV. I've tried updating the iBook graphics drivers and I also installed ATI Displays which doesn't do anything either. One of the TVs I've used has been used successfully to connect a PBook 15" to it so that's not a problem. I've read on various forums that a few other people have had similar problems and have had their iBooks sent in for Logic Board Repair to correct this problem. Quite frankly I'd like to avoid such a solution, if possible.
If anybody has any suggestions I'd appreciate them!
Thanks,
Ofer