ARTEMIS1759
Registered
Ok here is the low down with a few other problem maybe you guys could help me with....
I bought an Iomega HD while on deployment and it worked when I first got it and then it would not read on desktop or disk utility.
Here is the stats on my MAC:
It is an Early 2008 MACBook Pro 15"
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 1 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP31.0070.B07
SMC Version (system): 1.16f11
Serial Number (system): W8740F7SX91
Hardware UUID: 00000000-0000-1000-8000-001B63A70270
Sudden Motion Sensor:
State: Enabled
One issue I have is one of the memory cards went out and I can not get the Lap top to read a new one. I am guessing this one that does not read is effecting me going through boot up in MHD so I have to boot in BC? Any help here would be appreciated.
My diagnostics always says pass.
I have the MATSHITADVD-R UJ-857E DVD drive that I heard is junk and only works when it wants.
Here is the Serial-ATA:
Intel ICH8-M AHCI:
Vendor: Intel
Product: ICH8-M AHCI
Speed: 1.5 Gigabit
Description: AHCI Version 1.10 Supported
FUJITSU MHW2120BH:
Capacity: 111.79 GB
Model: FUJITSU MHW2120BH
Revision: 00810013
Serial Number: NZ0ST7A2TLB9
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Mac OS 9 Drivers: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
MHD:
Capacity: 79.88 GB
Available: 49.63 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /Volumes/MHD
BC:
Capacity: 31.47 GB
Available: 5.3 GB
Writable: Yes
File System: Case-sensitive Journaled HFS+
BSD Name: disk0s3
Mount Point: /
And the HD info:
External HD:
Capacity: 931.51 GB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk1
Product ID: 0x0370
Vendor ID: 0x059b (Omega Corporation)
Version: f6.15
Serial Number: 156000009d21
Speed: Up to 480 Mb/sec
Manufacturer: Omega
Location ID: 0xfa200000
Current Available (mA): 500
Current Required (mA): 2
Mac OS 9 Drivers: No
Partition Map Type: Unknown
S.M.A.R.T. status: Not Supported
I was getting an error code like 32 or 36 then the HD showed up and I repartitioned it. It showed the sub part of the HD like it does the MD and BC but now it won't and says there is an input/output error. I included two images for reference. Help please o my deployment I want movies but have nothing to save them to.
Help please.
I bought an Iomega HD while on deployment and it worked when I first got it and then it would not read on desktop or disk utility.
Here is the stats on my MAC:
It is an Early 2008 MACBook Pro 15"
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 1 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP31.0070.B07
SMC Version (system): 1.16f11
Serial Number (system): W8740F7SX91
Hardware UUID: 00000000-0000-1000-8000-001B63A70270
Sudden Motion Sensor:
State: Enabled
One issue I have is one of the memory cards went out and I can not get the Lap top to read a new one. I am guessing this one that does not read is effecting me going through boot up in MHD so I have to boot in BC? Any help here would be appreciated.
My diagnostics always says pass.
I have the MATSHITADVD-R UJ-857E DVD drive that I heard is junk and only works when it wants.
Here is the Serial-ATA:
Intel ICH8-M AHCI:
Vendor: Intel
Product: ICH8-M AHCI
Speed: 1.5 Gigabit
Description: AHCI Version 1.10 Supported
FUJITSU MHW2120BH:
Capacity: 111.79 GB
Model: FUJITSU MHW2120BH
Revision: 00810013
Serial Number: NZ0ST7A2TLB9
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Mac OS 9 Drivers: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
MHD:
Capacity: 79.88 GB
Available: 49.63 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /Volumes/MHD
BC:
Capacity: 31.47 GB
Available: 5.3 GB
Writable: Yes
File System: Case-sensitive Journaled HFS+
BSD Name: disk0s3
Mount Point: /
And the HD info:
External HD:
Capacity: 931.51 GB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk1
Product ID: 0x0370
Vendor ID: 0x059b (Omega Corporation)
Version: f6.15
Serial Number: 156000009d21
Speed: Up to 480 Mb/sec
Manufacturer: Omega
Location ID: 0xfa200000
Current Available (mA): 500
Current Required (mA): 2
Mac OS 9 Drivers: No
Partition Map Type: Unknown
S.M.A.R.T. status: Not Supported
I was getting an error code like 32 or 36 then the HD showed up and I repartitioned it. It showed the sub part of the HD like it does the MD and BC but now it won't and says there is an input/output error. I included two images for reference. Help please o my deployment I want movies but have nothing to save them to.
Help please.
