Just got a new Linksys BEFW11S4 ver. 3.
We're just trying to use it as a switch and wireless access point, not the router function. It works for Gateway and Dell laptops but not my Powerbook G4 Ti 667.
The network is configured as follows:
Cable modem access run through ver.1 Linksys BEFW11S4 then two 24 port switches.
The new router is attached to one of the ports of one switch.
I configured the new Linksys with no DHCP server and a static lan ip address. The G4 obtains a valid ip but gets very slow response when accessing the new Linksys' web interface and almost impossibly slow response from the ver. 1 Linksys. The G4 gets no response from the internet. Windows machines get fast normal access to both Linksys and the internet. I've tried static ip's on the G4, using the Linksys as a router with RIP turned on, but no luck.
Please if anyone has any ideas let me know.
We're just trying to use it as a switch and wireless access point, not the router function. It works for Gateway and Dell laptops but not my Powerbook G4 Ti 667.
The network is configured as follows:
Cable modem access run through ver.1 Linksys BEFW11S4 then two 24 port switches.
The new router is attached to one of the ports of one switch.
I configured the new Linksys with no DHCP server and a static lan ip address. The G4 obtains a valid ip but gets very slow response when accessing the new Linksys' web interface and almost impossibly slow response from the ver. 1 Linksys. The G4 gets no response from the internet. Windows machines get fast normal access to both Linksys and the internet. I've tried static ip's on the G4, using the Linksys as a router with RIP turned on, but no luck.
Please if anyone has any ideas let me know.