revolution2008
Registered
Every time I turn on my macbook 13 inch it shuts down on the apple logo grey screen. This is what happens:
- Power on
- Apply logo appears
- Spinning logo appears
- Progress bar appears and loads up about 10% then disappears and pops up again
- Macbook shuts down
It does this every time. I've tried loading in safe mode, resetting the pram, taking the battery out and holding the power button, taking out the ram, taking out the hard drive, etc
I just did the cmd+s on startup, typed in /sbin/fsck -fy and got this:
** /dev/rdisk0s2
** Root file system
Executing fsck_hfs (version diskdev_cmds-491.3~2).
** Checking Journaled HPS Plus volume.
** Checking extents overflow file.
** Checking catalog file.
Missing thread record (id = 6064124)
Disk0s2: I/O error.
Invalid node structure
(4, 18561)
** The volume Macintosh HD could not be verified completely.
/dev/rdisk0s2 (hfs) EXITED WITH SIGNAL 8
I hope someone can help me with this. It was working fine yesterday and this morning it started to give me problems. I don't have the installation cd but if its a cheaper fix than taking it to a repair shop ill buy it. I didn't want to get it unless I know it will fix the problem.
Thanks to those who help
- Power on
- Apply logo appears
- Spinning logo appears
- Progress bar appears and loads up about 10% then disappears and pops up again
- Macbook shuts down
It does this every time. I've tried loading in safe mode, resetting the pram, taking the battery out and holding the power button, taking out the ram, taking out the hard drive, etc
I just did the cmd+s on startup, typed in /sbin/fsck -fy and got this:
** /dev/rdisk0s2
** Root file system
Executing fsck_hfs (version diskdev_cmds-491.3~2).
** Checking Journaled HPS Plus volume.
** Checking extents overflow file.
** Checking catalog file.
Missing thread record (id = 6064124)
Disk0s2: I/O error.
Invalid node structure
(4, 18561)
** The volume Macintosh HD could not be verified completely.
/dev/rdisk0s2 (hfs) EXITED WITH SIGNAL 8
I hope someone can help me with this. It was working fine yesterday and this morning it started to give me problems. I don't have the installation cd but if its a cheaper fix than taking it to a repair shop ill buy it. I didn't want to get it unless I know it will fix the problem.
Thanks to those who help