Unable to ssh from mac-to-mac

S

seanscian

Registered
I installed 10.4.3 a couple days after it was released, and only this morning have I been unable to ssh from one computer to another. Yesterday, I was able to ssh from system to system, and even used sftp and scp to copy files. By the way, I truly do mean that. I used sftp to move a song file from one computer to another, logged out, put the mac to sleep. I woke up this morning, and decided to move another file - no go.

This seems to only occur when directly connected network nodes are involved, for example, I cannot ssh from 172.16.1.1 to 172.16.1.2. If, however, my router at 192.168.2.1 is set up to port forward to 172.16.1.2, I can ssh from 172.16.1.1 to 192.168.2.1 successfully, thus bypassing the error.

What's odd, to me at least, is that in the broken scenario the ssh client is not sending a "Client: Key Exchange Init" immediately after the client and server protocols are established between 172.16.1.1 to 172.16.1.2.

Here's a crude example, from the point of view of the server, of it working...

172.16.1.1 -> 172.16.1.2 SYN
172.16.1.2 -> 172.16.1.1 SYN ACK
172.16.1.1 -> 172.16.1.2 ACK
172.16.1.2 -> 172.16.1.1 Server Protocol: SSH-1.99-OpenSSH_3.8.1p1
172.16.1.1 -> 172.16.1.2 Client Protocol: SSH-2.0-OpenSSH_3.8.1p1
172.16.1.2 -> 172.16.1.1 ACK
172.16.1.1 -> 172.16.1.2 Client: Key Exchange Init
172.16.1.2 -> 172.16.1.1 Server: Key Exchange Init
172.16.1.1 -> 172.16.1.2 Client: Diffie-Hellman GEX Request
172.16.1.2 -> 172.16.1.1 Server: Diffie-Hellman Key Exchange Reply
172.16.1.1 -> 172.16.1.2 Client: Diffie-Hellman GEX Init
172.16.1.2 -> 172.16.1.1 Server: Diffie-Hellman GEX Reply
...and so on...
And from there everything negotiates out and I'm connected.

Meanwhile, here's a broken connection

172.16.1.3 -> 172.16.1.2 SYN
172.16.1.2 -> 172.16.1.3 SYN ACK
172.16.1.3 -> 172.16.1.2 ACK
172.16.1.2 -> 172.16.1.3 Server Protocol: SSH-1.99-OpenSSH_3.8.1p1
172.16.1.3 -> 172.16.1.2 Client Protocol: SSH-2.0-OpenSSH_3.8.1p1
172.16.1.2 -> 172.16.1.3 ACK
172.16.1.2 -> 172.16.1.3 Server: Key Exchange Init
172.16.1.3 -> 172.16.1.2 ACK
... two minutes pass ...
172.16.1.2 -> 172.16.1.3 FIN ACK
172.16.1.3 -> 172.16.1.2 ACK
172.16.1.3 -> 172.16.1.2 Client: Key Exchange Init
172.16.1.2 -> 172.16.1.3 RST
172.16.1.3 -> 172.16.1.2 Client: Diffie-Hellman GEX Request
172.16.1.2 -> 172.16.1.3 RST

That's just a filtered view of the ssh problem... there's more to the problem.

host_1:~ user$ ssh -vvv 172.16.1.2
OpenSSH_3.8.1p1, OpenSSL 0.9.7i 14 Oct 2005
debug1: Reading configuration data /Users/user/.ssh/config
debug1: Reading configuration data /etc/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to 172.16.1.2 [172.16.1.2] port 22.
debug2: fd 3 setting O_NONBLOCK
debug1: fd 3 clearing O_NONBLOCK
debug1: Connection established.
debug1: identity file /Users/user/.ssh/rsa1 type 0
debug1: identity file /Users/user/.ssh/rsa2 type 1
debug3: Not a RSA1 key file /Users/user/.ssh/dsa2.
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug3: key_read: missing keytype
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug2: key_type_from_name: unknown key type '-----END'
debug3: key_read: missing keytype
debug1: identity file /Users/user/.ssh/dsa2 type 2
debug1: Remote protocol version 1.99, remote software version OpenSSH_3.8.1p1
debug1: match: OpenSSH_3.8.1p1 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.8.1p1
debug3: Trying to reverse map address 172.16.1.2.
debug1: An invalid name was supplied
Cannot determine realm for numeric host address

debug1: An invalid name was supplied
A parameter was malformed
Validation error

debug1: An invalid name was supplied
Cannot determine realm for numeric host address

debug1: An invalid name was supplied
A parameter was malformed
Validation error

debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
Write failed: Broken pipe
host_1:~ user$

During the time that it's "trying to reverse map address", the system has sent out a DNS query regarding PTR record 172.16.1.2, one every 5 seconds, to the DNS servers configured on my system. No replies are ever received.

When I perform either "nslookup -type=PTR 172.16.1.2", I can observe the same results. Queries are sent, but no answers are received.

However, when I use "dig -t PTR 172.16.1.2", I, unsurprised, see this:

; <<>> DiG 9.2.2 <<>> -t PTR 172.16.1.2
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 21026
;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0

;; QUESTION SECTION:
;172.16.1.2. IN PTR

;; Query time: 15 msec
;; SERVER: 172.16.73.10#53(172.16.73.10)
;; WHEN: Sat Jan 7 20:38:06 2006
;; MSG SIZE rcvd: 30

So there's no answer. Fine, but that's my diagnostic tool doing it, and apparently no longer how OS X resolves, or attempts to resolve, private IP space.

My question is this: What changed overnight to cause this behavior?
 
I've been having similar problems... ssh ceased functioning properly very suddlenly (this happened to correspond loosely with changing to a linksys wrt54g v5 router, which is a POS just for the sake of noting so.) My room mate is able to use putty to ssh to the same machine with no problems, so I doubt that the router is the problem. I ran across your post when seeing if anybody had similar problems with ssh itself.

$ ssh -l **** ******.org -vvv
OpenSSH_3.8.1p1, OpenSSL 0.9.7i 14 Oct 2005
debug1: Reading configuration data /etc/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to j****.org [204.***.***.136] port 22.
debug1: Connection established.
debug1: identity file /Users/grahamr/.ssh/identity type -1
debug1: identity file /Users/grahamr/.ssh/id_rsa type -1
debug1: identity file /Users/grahamr/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_4.2
debug1: match: OpenSSH_4.2 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.8.1p1
debug3: Trying to reverse map address 204.249.212.136.
debug1: An invalid name was supplied
Cannot determine realm for numeric host address

debug1: An invalid name was supplied
A parameter was malformed
Validation error

debug1: An invalid name was supplied
Cannot determine realm for numeric host address

debug1: An invalid name was supplied
A parameter was malformed
Validation error

debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cb
c,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cb
c,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96
,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96
,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hel
lman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfou
r,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfou
r,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr

There seems to be no event corresponding with this behavior, so I am rather puzzled. Before checking these forums I had already tried removing the .ssh directory to no avail. If anybody has further suggestions please let me know,

thanks
 
So I chnaged my network settings to use the DNS servers of my ISP rather than just relying on the (unholy) linksys router... this knocked things back to the way they were before. If anybody has recommendations on a better router please let me know.
 
You must log in or register to reply here.
Back
Top