Hi Guys,
I am new mac user on this forum. I needed help regarding the configuration and network settings to enable my Powerbook G4 to access internet with the ethernet router (SAFECOM ADSL Ethernet router) connected to Airport express.
I have connected Phone line-->ADSL Router-->Ethernet cable-> Airport Exp.
as per the instructions.
under the 'Internet connect' it says that connected to Internet via Ethernet...
but I am unable to access my Router configuration page by typing 10.0.0.2 in the safari, & cannot open any webpage either.
Initially I tried all automatic settings in the System Preferences --> Network --> Airport
but nothing worked as earlier.
Later I connected like : Phone line--> ADSL router--> Ethernet cable--> Built in ethernet port on the mac (directly).
Also, I tried under the network settings -> built in ethernet -->
used all kinds of settings... using PPP, and later Manually configured.
used network utility and found some useful settings
IP address: 10.0.1.2
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
default man-0-dsl.as9105.n UGSc 59 4 ppp0
10.0.1/24 link#5 UCS 1 0 en1
10.0.1.2 localhost UHS 0 0 lo0
10.0.1.255 link#5 UHLWb 1 107 en1
88 ppp0 USc 0 185 ppp0
127 localhost UCS 0 0 lo0
localhost localhost UH 9 16191 lo0
169.254 link#5 UCS 0 0 en1
man-0-dsl.as9105.n 88-104-229-131.dyn UH 59 0 ppp0
Internet6:
Destination Gateway Flags Netif Expire
localhost link#1 UHL lo0
localhost Uc lo0
localhost link#1 UHL lo0
link#5 UC en1
avinash-babus-powe 0:11:24:9d:ef:c3 UHL lo0
ff01:: localhost U lo0
ff02::%lo0 localhost UC lo0
ff02::%en1 link#5 UC en1
I could not make sense out of this...
But even after changing all settings & configuring from square 1... the result is the same. I cannot open the router settings page.
(as suggested in here...)
http://safecom.cn/code/product/adsl/samr-4114/
Kindly help me to setup up the Router to the airport express.
Your help will be very much appreciated..
Thanking you...
Avinash
I am new mac user on this forum. I needed help regarding the configuration and network settings to enable my Powerbook G4 to access internet with the ethernet router (SAFECOM ADSL Ethernet router) connected to Airport express.
I have connected Phone line-->ADSL Router-->Ethernet cable-> Airport Exp.
as per the instructions.
under the 'Internet connect' it says that connected to Internet via Ethernet...
but I am unable to access my Router configuration page by typing 10.0.0.2 in the safari, & cannot open any webpage either.
Initially I tried all automatic settings in the System Preferences --> Network --> Airport
but nothing worked as earlier.
Later I connected like : Phone line--> ADSL router--> Ethernet cable--> Built in ethernet port on the mac (directly).
Also, I tried under the network settings -> built in ethernet -->
used all kinds of settings... using PPP, and later Manually configured.
used network utility and found some useful settings
IP address: 10.0.1.2
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
default man-0-dsl.as9105.n UGSc 59 4 ppp0
10.0.1/24 link#5 UCS 1 0 en1
10.0.1.2 localhost UHS 0 0 lo0
10.0.1.255 link#5 UHLWb 1 107 en1
88 ppp0 USc 0 185 ppp0
127 localhost UCS 0 0 lo0
localhost localhost UH 9 16191 lo0
169.254 link#5 UCS 0 0 en1
man-0-dsl.as9105.n 88-104-229-131.dyn UH 59 0 ppp0
Internet6:
Destination Gateway Flags Netif Expire
localhost link#1 UHL lo0
localhost Uc lo0
localhost link#1 UHL lo0
link#5 UC en1
avinash-babus-powe 0:11:24:9d:ef:c3 UHL lo0
ff01:: localhost U lo0
ff02::%lo0 localhost UC lo0
ff02::%en1 link#5 UC en1
I could not make sense out of this...
But even after changing all settings & configuring from square 1... the result is the same. I cannot open the router settings page.
(as suggested in here...)
http://safecom.cn/code/product/adsl/samr-4114/
Kindly help me to setup up the Router to the airport express.
Your help will be very much appreciated..
Thanking you...
Avinash