hi,
(on a ppc powerbook G4 1 Ghz OS X 10.3.9)
i've been getting a problem whereby all my applications cease to boot. the ones that are open continue to run fine but i get a generic error like "the function cannot be performed error code 10080" (i'm guessing the number there, sorry). my first clue this is about to happe is that none of my function keys work (brightness, volume). then usually i'll try to empty the trash and get an error, then nothing will load. i followed pretty much everything found here:
http://www.thexlab.com/faqs/multipleappsquit.html
(which seemed to describe well what's happening)
i ran the apple hardware test in loop mode it went 36 times with no problem, i've cache cleaned, i verified and repaired disk from install DVD. so here's what's showing up in the system.log when the problem happened:
Jan 11 18:45:25 localhost kernel: proc: table is full
Jan 11 18:46:13 localhost kernel: proc: table is full
Jan 11 18:48:13 localhost last message repeated 5 times
Jan 11 18:48:33 localhost loginwindow[238]: sendQuitEventToApp (VShieldBkgd): AESendWithMach returned error -1712
Jan 11 18:48:34 localhost loginwindow[238]: sendQuitEventToApp (VShieldUpdate): AESendWithMach returned error -1712
Jan 11 18:48:34 localhost loginwindow[238]: sendQuitEventToApp (VShield): AESendWithMach returned error -1712
Jan 11 18:48:35 localhost loginwindow[238]: sendQuitEventToApp (VShieldMount): AESendWithMach returned error -1712
Jan 11 18:48:48 localhost kernel: IOResources: match category DigiIO exists
Jan 11 18:48:49 localhost last message repeated 2 times
Jan 11 18:48:49 localhost automount[340]: logout notification received.
Jan 11 18:48:49 localhost automount[340]: requesting logout processing.
Jan 11 18:48:49 localhost automount[325]: logout notification received.
Jan 11 18:48:49 localhost automount[325]: requesting logout processing.
Jan 11 18:48:49 localhost automount[340]: handle_deferred_requests: user logged out.
Jan 11 18:48:49 localhost automount[325]: handle_deferred_requests: user logged out.
aped[1635]: Not affecting super-user process VShieldUpdate[1646]. This is just an informative message. It is not causing your problem.
aped[1635]: Not affecting super-user process VShield[1645]. This is just an informative message. It is not causing your problem.
aped[1635]: Not affecting super-user process VShieldMount[1641]. This is just an informative message. It is not causing your problem.
aped[1635]: Not affecting super-user process VShieldBkgd[1644]. This is just an informative message. It is not causing your problem.
Jan 11 18:48:50 localhost crashdump: Unable to determine CPSProcessSerNum pid: 1637 name: VShieldCore
Jan 11 18:48:50 localhost crashdump: Started writing crash report to: /Library/Logs/CrashReporter/VShieldCore.crash.log
Jan 11 18:48:50 localhost crashdump: Finished writing crash report to: /Library/Logs/CrashReporter/VShieldCore.crash.log
aped[1635]: Not affecting super-user process SecurityAgent[1648]. This is just an informative message. It is not causing your problem.
Jan 11 18:48:53 localhost kernel: jnl: close: flushing the buffer cache (start 0x4bb800 end 0x4bdc00)
Jan 11 18:48:54 localhost kernel: [HCIController][RequestPowerStateChange] 0->1
Jan 11 18:48:55 localhost kernel: [HCIController][RequestPowerStateChange] sleep is available
Jan 11 18:48:55 localhost kernel: [HCIController][RequestPowerStateChange] sleep is not enabled
Jan 11 18:48:55 localhost kernel: [HCIController][RequestPowerStateChange] Calling changePowerStateTo(1)
Jan 11 18:48:55 localhost kernel: [HCIController][setPowerState] 1 (ignore=0)
Jan 11 18:48:55 localhost kernel: [HCIController][setPowerStateWL] 1
Jan 11 18:48:55 localhost kernel: [HCIController][RequestPowerStateChange] changePowerStateTo() returned 0x0
Jan 11 18:48:55 localhost kernel: [HCIController][RequestPowerStateChange] changePowerStateTo(1) returned 0x0
Jan 11 18:48:55 localhost kernel: [HCIController][PerformPowerStateChange] 0->1
Jan 11 18:48:55 localhost kernel: [HCIController][CompletePowerStateChange]
Jan 11 18:48:58 localhost kernel: IOResources: match category DigiIO exists
Jan 11 18:48:58 localhost kernel: [HCIController][RequestPowerStateChange] 1->0
Jan 11 18:48:58 localhost kernel: [HCIController][RequestPowerStateChange] sleep is available
Jan 11 18:48:58 localhost kernel: [HCIController][RequestPowerStateChange] sleep is not enabled
Jan 11 18:48:58 localhost kernel: [HCIController][RequestPowerStateChange] Calling changePowerStateTo(0)
Jan 11 18:48:58 localhost kernel: [HCIController][setPowerState] 0 (ignore=0)
Jan 11 18:48:58 localhost kernel: [HCIController][setPowerStateWL] 0
Jan 11 18:48:58 localhost kernel: [HCIController][PerformPowerStateChange] 1->0
Jan 11 18:48:58 localhost kernel: [AppleUSBHCIController][StopIsochPipeRead] - mInt1IsochInPipe = 0 - numReadsPending = 0
Jan 11 18:48:58 localhost kernel: [HCIController][CompletePowerStateChange]
Jan 11 18:48:58 localhost kernel: [HCIController][RequestPowerStateChange] changePowerStateTo() returned 0x0
Jan 11 18:48:58 localhost kernel: [HCIController][RequestPowerStateChange] changePowerStateTo(0) returned 0x0
Jan 11 18:48:58 localhost crashdump: Unable to determine CPSProcessSerNum pid: 1652 name: VShieldCore
Jan 11 18:48:58 localhost crashdump: Started writing crash report to: /Library/Logs/CrashReporter/VShieldCore.crash.log
Jan 11 18:48:58 localhost crashdump: Finished writing crash report to: /Library/Logs/CrashReporter/VShieldCore.crash.log
and here's what's found in the VShieldCore.crash.log that it refers to:
Host Name: Mikes-Computer.local
Date/Time: 2007-01-11 18:48:49 -0500
OS Version: 10.3.9 (Build 7W98)
Report Version: 2
Command: VShieldCore
Path: /usr/local/vscanx/VShieldCore
Version: ??? (???)
PID: 1637
Thread: Unknown
Link (dyld) error:
dyld: /usr/local/vscanx/VShieldCore can't open library: @executable_path/../Frameworks/StuffIt.framework/Versions/A/StuffIt (No such file or directory, errno = 2)
sooooo. if anyone has any ideas i would be so so appreciative, thanks a million,
mike
(on a ppc powerbook G4 1 Ghz OS X 10.3.9)
i've been getting a problem whereby all my applications cease to boot. the ones that are open continue to run fine but i get a generic error like "the function cannot be performed error code 10080" (i'm guessing the number there, sorry). my first clue this is about to happe is that none of my function keys work (brightness, volume). then usually i'll try to empty the trash and get an error, then nothing will load. i followed pretty much everything found here:
http://www.thexlab.com/faqs/multipleappsquit.html
(which seemed to describe well what's happening)
i ran the apple hardware test in loop mode it went 36 times with no problem, i've cache cleaned, i verified and repaired disk from install DVD. so here's what's showing up in the system.log when the problem happened:
Jan 11 18:45:25 localhost kernel: proc: table is full
Jan 11 18:46:13 localhost kernel: proc: table is full
Jan 11 18:48:13 localhost last message repeated 5 times
Jan 11 18:48:33 localhost loginwindow[238]: sendQuitEventToApp (VShieldBkgd): AESendWithMach returned error -1712
Jan 11 18:48:34 localhost loginwindow[238]: sendQuitEventToApp (VShieldUpdate): AESendWithMach returned error -1712
Jan 11 18:48:34 localhost loginwindow[238]: sendQuitEventToApp (VShield): AESendWithMach returned error -1712
Jan 11 18:48:35 localhost loginwindow[238]: sendQuitEventToApp (VShieldMount): AESendWithMach returned error -1712
Jan 11 18:48:48 localhost kernel: IOResources: match category DigiIO exists
Jan 11 18:48:49 localhost last message repeated 2 times
Jan 11 18:48:49 localhost automount[340]: logout notification received.
Jan 11 18:48:49 localhost automount[340]: requesting logout processing.
Jan 11 18:48:49 localhost automount[325]: logout notification received.
Jan 11 18:48:49 localhost automount[325]: requesting logout processing.
Jan 11 18:48:49 localhost automount[340]: handle_deferred_requests: user logged out.
Jan 11 18:48:49 localhost automount[325]: handle_deferred_requests: user logged out.
aped[1635]: Not affecting super-user process VShieldUpdate[1646]. This is just an informative message. It is not causing your problem.
aped[1635]: Not affecting super-user process VShield[1645]. This is just an informative message. It is not causing your problem.
aped[1635]: Not affecting super-user process VShieldMount[1641]. This is just an informative message. It is not causing your problem.
aped[1635]: Not affecting super-user process VShieldBkgd[1644]. This is just an informative message. It is not causing your problem.
Jan 11 18:48:50 localhost crashdump: Unable to determine CPSProcessSerNum pid: 1637 name: VShieldCore
Jan 11 18:48:50 localhost crashdump: Started writing crash report to: /Library/Logs/CrashReporter/VShieldCore.crash.log
Jan 11 18:48:50 localhost crashdump: Finished writing crash report to: /Library/Logs/CrashReporter/VShieldCore.crash.log
aped[1635]: Not affecting super-user process SecurityAgent[1648]. This is just an informative message. It is not causing your problem.
Jan 11 18:48:53 localhost kernel: jnl: close: flushing the buffer cache (start 0x4bb800 end 0x4bdc00)
Jan 11 18:48:54 localhost kernel: [HCIController][RequestPowerStateChange] 0->1
Jan 11 18:48:55 localhost kernel: [HCIController][RequestPowerStateChange] sleep is available
Jan 11 18:48:55 localhost kernel: [HCIController][RequestPowerStateChange] sleep is not enabled
Jan 11 18:48:55 localhost kernel: [HCIController][RequestPowerStateChange] Calling changePowerStateTo(1)
Jan 11 18:48:55 localhost kernel: [HCIController][setPowerState] 1 (ignore=0)
Jan 11 18:48:55 localhost kernel: [HCIController][setPowerStateWL] 1
Jan 11 18:48:55 localhost kernel: [HCIController][RequestPowerStateChange] changePowerStateTo() returned 0x0
Jan 11 18:48:55 localhost kernel: [HCIController][RequestPowerStateChange] changePowerStateTo(1) returned 0x0
Jan 11 18:48:55 localhost kernel: [HCIController][PerformPowerStateChange] 0->1
Jan 11 18:48:55 localhost kernel: [HCIController][CompletePowerStateChange]
Jan 11 18:48:58 localhost kernel: IOResources: match category DigiIO exists
Jan 11 18:48:58 localhost kernel: [HCIController][RequestPowerStateChange] 1->0
Jan 11 18:48:58 localhost kernel: [HCIController][RequestPowerStateChange] sleep is available
Jan 11 18:48:58 localhost kernel: [HCIController][RequestPowerStateChange] sleep is not enabled
Jan 11 18:48:58 localhost kernel: [HCIController][RequestPowerStateChange] Calling changePowerStateTo(0)
Jan 11 18:48:58 localhost kernel: [HCIController][setPowerState] 0 (ignore=0)
Jan 11 18:48:58 localhost kernel: [HCIController][setPowerStateWL] 0
Jan 11 18:48:58 localhost kernel: [HCIController][PerformPowerStateChange] 1->0
Jan 11 18:48:58 localhost kernel: [AppleUSBHCIController][StopIsochPipeRead] - mInt1IsochInPipe = 0 - numReadsPending = 0
Jan 11 18:48:58 localhost kernel: [HCIController][CompletePowerStateChange]
Jan 11 18:48:58 localhost kernel: [HCIController][RequestPowerStateChange] changePowerStateTo() returned 0x0
Jan 11 18:48:58 localhost kernel: [HCIController][RequestPowerStateChange] changePowerStateTo(0) returned 0x0
Jan 11 18:48:58 localhost crashdump: Unable to determine CPSProcessSerNum pid: 1652 name: VShieldCore
Jan 11 18:48:58 localhost crashdump: Started writing crash report to: /Library/Logs/CrashReporter/VShieldCore.crash.log
Jan 11 18:48:58 localhost crashdump: Finished writing crash report to: /Library/Logs/CrashReporter/VShieldCore.crash.log
and here's what's found in the VShieldCore.crash.log that it refers to:
Host Name: Mikes-Computer.local
Date/Time: 2007-01-11 18:48:49 -0500
OS Version: 10.3.9 (Build 7W98)
Report Version: 2
Command: VShieldCore
Path: /usr/local/vscanx/VShieldCore
Version: ??? (???)
PID: 1637
Thread: Unknown
Link (dyld) error:
dyld: /usr/local/vscanx/VShieldCore can't open library: @executable_path/../Frameworks/StuffIt.framework/Versions/A/StuffIt (No such file or directory, errno = 2)
sooooo. if anyone has any ideas i would be so so appreciative, thanks a million,
mike
