Les Cornwell
Registered
I migrated from a wireless setup with an Airport Extreme Base Station (the "Flying Saucer" model), and two Macs (iMac G4 and TiBook G4), both running OSX Panther 10.3.9, to a new Intel iMac 24" 2.8Ghz, running OSX Leopard 10.5.2. I replaced the AEBS by a 1TB Time Capsule. The ADSL modem remained in place.
In the old setup, I also had an Airport Express Basestation hooked up to my stereo installation.
Question 1: I cannot seem to find my Airport Express Base Station through the new Airport Utility (v.5.3.1), so is it possible to stream music at all with this Time Capsule?
Question 2: this relates to a printer problem. I replaced an older HP 970cxi by a Canon Pixma IP4500. No problem if the printer is connected directly to the Intel iMac, but I always get a printer error 300 when the printer is connected to the Time Capsule. Is there anyone who has a comparable setup, and who is able to print wirelessly through the Time Capsule on a Pixma IP4500?
I can add that I first hooked up the printer directly to the iMac to do the installation (I see this is suggested in several threads). Further, I went to the Canon site (this location) and downloaded what was offered for the Pixma IP4500, i.e.:
- iP4500 series Printer Driver Ver. 6.9.3 (Mac OS X)
- iP4500 series Printer Driver Ver. 10.1.0.0 (Mac OS X CUPS)
- Easy-PhotoPrint EX Ver. 1.3.0 (Mac OS X)
After installation, I rebooted, ran fsck and afterwards ran Disk Utility/Repair Permissions from the booted hard drive. There were a couple of permissions that needed fixing.
Any input would be welcome. I am pulling out my hair! Thanks.
In the old setup, I also had an Airport Express Basestation hooked up to my stereo installation.
Question 1: I cannot seem to find my Airport Express Base Station through the new Airport Utility (v.5.3.1), so is it possible to stream music at all with this Time Capsule?
Question 2: this relates to a printer problem. I replaced an older HP 970cxi by a Canon Pixma IP4500. No problem if the printer is connected directly to the Intel iMac, but I always get a printer error 300 when the printer is connected to the Time Capsule. Is there anyone who has a comparable setup, and who is able to print wirelessly through the Time Capsule on a Pixma IP4500?
I can add that I first hooked up the printer directly to the iMac to do the installation (I see this is suggested in several threads). Further, I went to the Canon site (this location) and downloaded what was offered for the Pixma IP4500, i.e.:
- iP4500 series Printer Driver Ver. 6.9.3 (Mac OS X)
- iP4500 series Printer Driver Ver. 10.1.0.0 (Mac OS X CUPS)
- Easy-PhotoPrint EX Ver. 1.3.0 (Mac OS X)
After installation, I rebooted, ran fsck and afterwards ran Disk Utility/Repair Permissions from the booted hard drive. There were a couple of permissions that needed fixing.
Any input would be welcome. I am pulling out my hair! Thanks.