Recent content by 9600 G3

  1. 9

    rexec command to display database??

    On the PC side here we use a reflection session to mirror display a database on a unix sco box using the comman axis -d %ip% with the REXEC method. On the Mac in OS 9 we use MacX to do the same. Is it possible to do it within the terminal. I have tried XDarwin with no luck. eXodus works but is...
  2. 9

    PowerMac 8500 -> G3 DaughterBoard?

    I presume you mean the PCI ard from a B/W G3 am I correct because if so maybe you can help me too. I have been wanting to try to put that card into my 9600 for awhile but I have not tried in fear that the 66mhz might pose a problem. If it works OK let me know I am quite interested. The only...
  3. 9

    Sound Hack for Upgraded Legacy PPC

    Check out http://www.xlr8yourmac.com there is a sound hack that works? My 9600 newer tech G3 has sound in X now
  4. 9

    PowerMac 8500 -> G3 DaughterBoard?

    I have a similar setup: 9600/200 w/NewerTech G3 400 352mb RAM 3 internal SCSI Drives 2 Video cards, Stock IMS Twin Turbo and ATI Rage Pro 8mb The monitor is running off of the ATI card no problems 12x CD ROM USB PCI Card Everything seems to working just fine, if you have any external...
  5. 9

    Serious Fragmentation How do I fix it?

    I have OS X on a seperate 6gb partition. Is Norton safe to use on OS X? I highly doubt it but, I am afraid to try.
  6. 9

    Serious Fragmentation How do I fix it?

    I have a seriously fragmented OS X Drive and Norton Utilities says it can not optimize it. Now what do I do. I am afraid to try to run Disk Doctor that just seems like a bad idea. Any Suggestions?
  7. 9

    Epson Drivers

    From an email I recieved, Thank you for taking the time to contact Epson. It is my pleasure to respond to your inquiry. This is from a press release Sept 15, 2000, at http://www.macweek.com "We don't plan to have drivers available for the public beta," said John Jatinen, assistant...
  8. 9

    9600 Upgrade

    There are no drivers yet so I do not believe the backside cache of my card is working. (At least I did not remove the motherboard cache.) The USB card is recognized but I have not had time to see if it works but Apple System Profile sees it. There is a copy of X running where I work as well on a...
  9. 9

    Hard Disk Toolkit troubles

    It works now. I reformatted the drive with verification and set it to HFS+. (It was HFS before) Booted into OS X and back and the drive is still there. Thanks again.
  10. 9

    No dice no matter what

    I have read somewhere on http://www.xlr8yourmac.com that there is some issues with G4 upgrade cards. My 9600 has a Newer G3/400 card and seems to work just fine as long as my external scsi zip is not powered on.
  11. 9

    Hard Disk Toolkit troubles

    I recieved an old 2gb drive from a PC friend and wanted to use it in my 9600. I had to initialize it using Hard Disk Toolkit. All is well until I started to run OS X now when I switch back to OS 9 I can no longer see the drive. Is there anyway to force Drive Setup to work? Does anyone know if...
  12. 9

    9600 Upgrade

    Here we go, 9600/200 Newer Tech G3/400 352mb RAM ATI Rage Pro 8mb xlr8 USB pci Installed and running.
  13. 9

    Install on 9600 Newer G3/400

    I take it all back, I went and tried something else it was either impatience or the fact that for some reason I had placed the System Disk control panel on my OS 9 disk. I removed it, selected the System Disk from my Mac Os X disk and it booted right up. It took a while so maybe I mistook time...
  14. 9

    Install on 9600 Newer G3/400

    I was able to install on my 9600/200. I have a Newer Tech G3 400 card, 352mb of RAM and a XLR8 USB PCI card. My monitor is running on a ATI RAGE ProCard. OS X is installed on a seperate 2gb drive. I was able to boot from the CD, Install, and run through the setup assistant after the install. The...
Top