Recent content by bob@bomar.us

I am wrinting a program that does some calculations, and what I want is if the value is above a certain value, then change the color of the output from black to red. I can not find any way to do this. Thanks Bob

Make sure that you include the preceding dot when deleting: > rm .gislock*

ipfw(8) means the eighth section of the man pages: # man 8 ipfw Its user commands. Section 3 are libraries, etc...

NFS does not support username/passwords.

Ethernet is a protocol, IEEE 802.3. To connect to a network (LAN/MAN/WAN) using ethernet, you need a Network Interface Card, NIC. A modem is a device that, put simply, will connect to a dial in system, using PPP/SLIP/etc... If you want to dial into something, cable or DSL, you will need a...

Has anybody been sucessful in installing evolution on OS X with X11, through fink?

See if libdl.0.dylib is in /sw/lib, if not, then link it from /usr/lib

en0 is the onboard NIC en1 is the wireless NIC lo0 is the loopback device gif0 is a tunnel device stf0 is a IPv6 to IPv4 tunnel device fw0 is the firewall device ppp0 would be a ppp device You want to monitor the active NIC, if you are hard wired, then en0, wireless then en1.

I use an airport extreme so that I can take advantage of WPA Encryption, and since I am eventually going to employ a radius authentication system. The airport extreme supports 11b/g so as long as you have a b/g card it will work. I would definetly recommend the airport extreme.

What you can do is this: Int --> Cbl Mdm --> (DHCP) Router (10.0.0.1) --> (10.0.0.2) NetBarrier (192.168.1.1) --> Hub --> Other Then have the Netbarrier set to share connections, but has 2 static IP's. The default gateway for the NetBarrier will be 10.0.0.1, and the default gateway for...

Thats why you need to recompile PHP, to add the functions that GD provide into the php binary.

Try this: In /etc/services add the following: ftp-data 2120/udp ftp-data 2120/tcp ftp 2121/udp ftp 2121/tcp Then comment out the following ftp-data 20/udp ftp-data 20/tcp ftp 21/udp ftp 21/tcp Then: sudo killall...

You need to recompile PHP with GD support. Thats the best way other than hacking it together.

Apple's Airport base station will act as a printer server, and I do believe its compatible with OS9/X. Mine has a USB connection in which you plug the printer into.